The chemistry of thujone. IX. Thujone as a chiral synthon for the synthesis of optically active steroid analogues. The vinylpicoline route

The thujone-derived enone 1 , upon base-catalyzed reaction with 2-methyl-6-vinylpyridine is converted to the pyridine analogue 5 (Scheme 1). Catalytic reduction of the latter to 6 generates two new centers of chirality which eventually become C(8) and C(14) in the ultimate synthetic steroid analogue 12 . An X-ray analysis of 6 establishes the structure and absolute configuration so as to determine its suitability in subsequent synthetic studies. The acetal derivative 7 , via Birch reduction, hydrolysis, and internal aldol cyclization, is converted into the cyclohexenone analogue 10 (Scheme 2). This ‘one-pot’ process affords an efficient conversion of the pyridine ring into a cyclohexenone system required for A-ring construction of the steroid skeleton. Finally, conversion of 10 , via the unsaturated diketone 11 , provides the chiral steroid analogue 12 .     

Über 4-Alkylamino-bzw. 4-Arylamino-5,6-dihydro-2(1H)-pyridinthione

Heating 1-alkyl- or 1-aryldihydro-6-methyl-2(1H)-pyrimidinethiones5, 6 in an inert medium causes rearrangement to 4-alkylamino-(4-arylamino-)-5,6-dihydro-2(1H)-pyridinethiones11, 12, probably via the methylene form29, by thermal heterolysis of the N₁/C₂ bond and exchange of the alkylamino (arylamino) group 1 through the carbon atom of the methylene group 6. The aminodihydropyridinethiones11, which can be regarded as cyclic derivatives of 3-aminothiocrotonamide, react with bistrichlorophenylmalonate under diacylation, and with formaldehyde and primary amines to yield aminodialkylation products of the enamine system, tetrahydro-4-hydroxy-7,7-dimethyl-5-thioxopyrido[4,3-b]pyridine-2(1H)-ones13, 14 and hexahydro-7,7-dimethylpyrido[4,3-d]pyrimidine-5(6H)-thiones18, 19, 21 respectively. H₂O₂ converts11 to the corresponding 4-aminodihydro-2(1H)-pyridones22, which can be reconverted into11 with P₄S₁₀.11 reacts with alkyl halides to 2-alkylthiodihydropyridines23, 24, 25. The mechanism of the methylpyrimidine-pyridine rearrangement is discussed.     

Mediation of ultrafast light-harvesting by a central dimer in phycoerythrin 545 studied by transient absorption and global analysis

We report ultrafast femtosecond transient absorption measurements of energy-transfer dynamics for the antenna protein phycoerythrin 545, PE545, isolated from a unicellular cryptophyte Rhodomonas CS24. The phycoerythrobilins are excited at both 485 and 530 nm, and the spectral response is probed between 400 and 700 nm. Room-temperature measurements are contrasted with measurements at 77 K. An evolution-associated difference spectra (EADS) analysis is combined with estimations of bilin spectral positions and energy-transfer rates to obtain a detailed kinetic model for PE545. It is found that sub pulse-width dynamics include relaxation between the exciton states of a chromophore dimer (beta 50/60) located in the core of the protein. Energy transfer from the lowest exciton state of the phycoerythrobilin (PEB) dimer to one of the periphery 15,16-dihydrobiliverdin (DBV) bilins is found to occur on a time scale of 250 fs at room temperature and 960 fs at 77 K. A host of energy-transfer dynamics involving the beta 158, beta 82, and alpha 19 bilins occur on a time scale of 2 ps at room temperature and 3 ps at 77 K. A final energy transfer occurs between the red-most DBV bilins with a time scale estimated to be approximately 30 ps. The role of the centrally located phycoerythrobilin dimer is seen as crucial-spectrally as it expands the cross-section of absorption of the protein; structurally as it sits in the middle of the protein acting as an intermediary trap; and kinetically, as the internal conversion and subsequent red-shift of the excitation is extremely fast.     

Poly[[pentaaquasulfato‐μ4‐(R,R)‐tartrato‐dicadmium(II)] trihydrate]

The asymmetric unit in the title compound, {[Cd₂(C₄H₄O₆)(SO₄)(H₂O)₅]·3H₂O}_n, is composed of two cadmium cations, one (R,R)‐tartrate and one sulfate anion, five aqua ligands and three solvent water molecules. One of the cadmium ions is coordinated in an octahedral environment, whereas the second is surrounded by seven O atoms in a pentagonal–bipyramidal geometry. Both types of coordination polyhedra form two sets of perpendicular non‐intersecting polymeric chains. CdO₆ octahedra share two corners, while CdO₇ units are joined by a bridging carboxylate group. An extensive hydrogen‐bond pattern involving all of the OH groups contributes to the stabilization of the structure.     

An easy preparation of per- and poly-fluoroalkyl propenyl sulfones

Sodium tridecafluorohexanesulfinate (1a) and sodium 1-chloro-2,2,2-trifluoroethanesulfinate (1b) were prepared by the treatment of 1-iodo-tridecafluorohexane and 1-bromo-1-chloro-2,2,2-trifluoroethane with sodium dithionite in a water-acetonitrile solution. Prolonged reaction of 1a with allyl bromide in DMF afforded tridecafluorohexane 1-propenyl sulfone 2 as the only product in good yield. A similar treatment of 1b gave exclusively 1-chloro-2,2,2-trifluoroethane 3-propenyl sulfone 4. Bromination of 4 followed by dehydrobromination with Et₃N resulted in a mixture of 1-chloro-2,2,2-trifluoroethane 3-bromo-1-propenyl sulfone 6 and 1-chloro-2,2,2-trifluoroethane 2-bromo-3-propenyl sulfone 7, while dehydrobromination with pyridine gave sulfone 6 practically as the only product. α,β-Unsaturated sulfones 2 and 6 were shown to be active dienophiles.     

Sodium dithionite initiated addition of 1-bromo-1-chloro-2,2,2-trifluoroethane to β-pinene: Synthesis of CF3-substituted terpenoids

Sodium dithionite effectively promotes the addition of 1-bromo-1-chloro-2,2,2-trifluoroethane to the exocyclic double bond of β-pinene. The reaction proceeded in an MeCN/H₂O system to give almost quantitatively a 1:1 mixture of diastereoisomers of 4-(2-bromoisopropyl)-1-(2-chloro-3,3,3-trifluoropropyl)-cyclohexene (1). Dehydrobromination of 1 with pyridine gave a mixture of regioisomeric dienes 2 and 3, while treatment with DBU at elevated temperature resulted in total dehydrohalogenation to give trienes 4 and 5. Reduction of 1 with Bu₃SnH gave 1-(2-chloro-3,3,3-trifluoropropyl)-4-(isopropyl)cyclohexene (6) which on dehydrochlorination with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) afforded conjugated diene, 4-isopropyl-1-(trans-3,3,3-trifluoropropenyl)-cyclohexene (7), with 50% overall yield. All the transformations proceeded with the retention of configuration at the carbon atom C-4 and the final compound 7 exhibited high optical activity.     

Unusual solid-state conformation of D-glucitol hexa(p-chlorobenzoate)

The carbon atom chain in the molecule ofd-glucitol hexa (p-chlorobenzoate) adopts a planar, zigzag conformation in the solid state, as determined by X-ray crystallography. The preference for such conformation in the crystal can be ascribed to the stacking interactions in which an infinite number of p-chlorobenzoyloxy substituents is involved.     

The vibrational spectra and normal coordinate analysis of tetracyclopropyllead

All the fundamental frequencies observed in IR and Raman spectra have been assigned to the normal modes of the molecule (C₃H₅)₄Pb (C₃H₅ = cyclopropyl). The calculated force field is compared to that of (C₃H₅)₂Hg and the Cmetal stretching force constants are discussed along with those of Me₄Pb and Me₂Hg; The similarity of the spectra of cyclopropyllead and cyclopropyl-mercury proves that the vibrations of cyclopropyl structural units are isolated in both molecules.